Constant Current LED Drivers

SLM Series

90-160 W, Tri-Mode Dimming™ (TRIAC, ELV & 0-10 V), High Power, 1-100% Dimming Range, 12 V / 100 mA Auxiliary Output
Input Voltage Max Output Power Output Voltage Output Current Range Efficiency THD       Max Case Temp Power Factor Dimming Method Dimming Range Start Time
120 to 277 Vac 160 W 28 to 160 Vdc 1 to 4.4 A Constant Current up to 90% < 20% 90ºC (measured at the hot spot) >0.9 Forward-Phase, Reverse-Phase & 0-10 V 1-100% (% of Iout) 750 ms Maximum
Features:
  • Compatible with TRIAC ( forward-phase or leading-edge), ELV (reverse-phase or trailing-edge), and 0-10 V dimmers
  • 12 V/100 mA auxiliary output
  • IP66-rated case with silicone-based potting
  • 90°C maximum case hot spot temperature
  • Protections: output open load, short-circuit (latch-off), and over-temperature with auto recovery
  • Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 15 Class A at 120 Vac and 277 Vac
  • Complies with ENERGY STAR® luminaire specification and DLC (DesignLight Consortium®) technical requirements
  • Worldwide safety approvals

Applications:
  • High Bay
  • Horticulture
  • Indoor lighting
  • Industrial Lighting
  • Outdoor LED Light
  • Street Lights
C Ru UsFC Certified5 Year Warrenty
Technical Documentation:
> Datasheet
Email me the additional documentation:
Loading Products
ERP Part Number Nominal
Input Voltage (Vac)
Output Current (mA) Power (W) Voltage Range (Vdc) Case Type Dimming Status Availability
SLM090W-2.1-42-TC 120 to 277 2100 88.2 30 - 42 IP66 Rectangular Metal For/Rev Phase & 0-10V, 1-100% production Check >
SLM100W-1.7-56-TA 120 to 277 1700 95.2 40 - 56 IP66 Rectangular Metal For/Rev Phase & 0-10V, 1-100% production Check >
Notes:
Notes:
  •    T: Tri-mode dimming (1-100%), C: 1kV /2kV surge protection
  •    T: Tri-mode dimming (1-100%), A: 4kV/4kV surge protection
  •    X: No dimming, A: 4kV/4kV surge protection
  •    Z: 0-10V dimming only (1-100%), A: 4kV/4kV surge protection
  • Forced air cooling or heatsink base plate (aluminum baseplate: 210mm x 200mm x 2mm) is required for total continuous power exceeding 120 W
  • For additional options of output current and output voltage, contact your sales representative or contact us via email.