Constant Voltage LED Drivers

ELP Series

6-18 W, Flicker-Free Phase-Cut, Forward and Reverse-Phase, Dimming
  • NOT RECOMMENDED FOR NEW DESIGNS. For new designs, select the EBR series.
  • Active power factor correction (PF) > 0.9 (PF ≥ 0.8 for 230 Vac models below 10 W)
  • Compatible with industry standard TRIAC (forward-phase or leading-edge) and ELV (reverse-phase or trailing-edge) phase-cut dimmers
  • Short circuit, over-current, over-voltage, and over-temperature protection with auto-recovery
  • Conducted and radiated EMI: FCC CFR Title 47 Part 15 Class B at 120 Vac and EN55015 (CISPR 15) at 220/230/240 Vac
  • Complies with ENERGY STAR® luminaire specification
  • IP20-rated case with silicone-based potting
  • 94V-0 flammability rating
  • 90°C maximum case hot spot temperature
  • Lifetime: 50,000 hours min at 70°C case temperature
  • Class 2 power supply

  • Architectural
  • Commercial lighting
  • Residential light
  • TRIAC retrofits
Technical Documentation:
> Short Datasheet
Email me the additional documentation:
Input Voltage Max Output Power Output Voltage Output Current Range Efficiency THD       Max Case Temp Power Factor Dimming Method Dimming Range Start Time
120 or 220/230/240 Vac 18 W 8 to 41 Vdc 250 mA to 1.4 A Constant Current up to 80% 90º C (measured at the hot spot) >0.9 Forward-Phase, Reverse-Phase 10-100% (% of Iout) 1 s max
Loading Products
ERP Part Number Nominal
Input Voltage (Vac)
Output Current (mA) Power (W) Voltage Range (Vdc) Case Type Dimming Status Availability
  • For additional options of output current and output voltage, contact your sales representative or send an email to: