Constant Voltage LED Drivers
ELR Series
6-18 W, Flicker-Free Phase-Cut, Forward and Reverse-Phase, Dimming

Features:
- NOT RECOMMENDED FOR NEW DESIGNS. For new designs, use the EBR series.
- Active power factor correction (PF) > 0.9 (PF ≥ 0.8 for 230 Vac models below 10 W) and THD < 20%
- Compatible with industry standard TRIAC (forward-phase or leading-edge) / ELV (reverse-phase or trailing-edge) phase-cut dimmers
- Protections: output open load, over-current and short-circuit (hiccup), and over-temperature with auto recovery
- Conducted and radiated EMI: FCC CFR Title 47 Part 15 Class B at 120 Vac and EN55015 (CISPR 15) at 220/230/240 Vac
- Complies with ENERGY STAR® luminaire specification and DLC (DesignLight Consortium®) technical requirements
- IP20-rated case with silicone-based potting
- 94V-0 flammability rating
- 90°C maximum case hot spot temperature
- Lifetime: 50,000 hours min at 70°C case temperature
- Class 2 power supply
Applications:
- Architectural
- Commercial lighting
- Downlight
Input Voltage | Max Output Power | Output Voltage | Output Current Range | Efficiency | THD | Max Case Temp | Power Factor | Dimming Method | Dimming Range | Start Time |
---|---|---|---|---|---|---|---|---|---|---|
120 or 230 Vac nominal | 18 W | 12 to 42 Vdc | 200 mA to 1 A Constant Current | up to 84% | < 20% | 90º C (measured at the hot spot) | >0.9 | Forward-Phase, Reverse-Phase | 10-100% (% of Iout) | 1 s max |

ERP Part Number | Nominal Input Voltage (Vac) |
Output Current (mA) | Power (W) | Voltage Range (Vdc) | Case Type | Dimming | Status | Availability |
---|---|---|---|---|---|---|---|---|
ELR018U-0700-24 | 120 | 700 | 14 - 24 | IP20 Round Plastic | For/Rev Phase, 10-100% | production | Check > | |
ELR018E-1000-18 | 120 | 1000 | 12 - 18 | IP20 Round Plastic | For/Rev Phase, 10-100% | production | Check > | |
ELR009U-0200-42 | 120 | 200 | 28 - 42 | IP20 Round Plastic | For/Rev Phase, 10-100% | production | Check > |
Notes:
- For additional options of output current and output voltage, contact your sales representative or send an email to: SaveEnergy@erp-power.com