Constant Current LED Drivers
SLM Series
90-160 W, Tri-Mode Dimming™ (TRIAC, ELV & 0-10 V), High Power, 1-100% Dimming Range, 12 V / 100 mA Auxiliary Output
| Input Voltage | Max Output Power | Output Voltage | Output Current Range | Efficiency | THD | Max Case Temp | Power Factor | Dimming Method | Dimming Range | Start Time |
|---|---|---|---|---|---|---|---|---|---|---|
| 120 to 277 Vac | 160 W | 28 to 160 Vdc | 1 to 4.4 A Constant Current | up to 90% | < 20% | 90ºC (measured at the hot spot) | >0.9 | Forward-Phase, Reverse-Phase & 0-10 V | 1-100% (% of Iout) | 750 ms Maximum |
Features:
- Compatible with TRIAC ( forward-phase or leading-edge), ELV (reverse-phase or trailing-edge), and 0-10 V dimmers
- 12 V/100 mA auxiliary output
- IP66-rated case with silicone-based potting
- 90°C maximum case hot spot temperature
- Protections: output open load, short-circuit (latch-off), and over-temperature with auto recovery
- Conducted and radiated EMI: Compliant with FCC CFR Title 47 Part 15 Class A at 120 Vac and 277 Vac
- Complies with ENERGY STAR® luminaire specification and DLC (DesignLight Consortium®) technical requirements
- Worldwide safety approvals
Applications:
- High Bay
- Horticulture
- Indoor lighting
- Industrial Lighting
- Outdoor LED Light
- Street Lights
| ERP Part Number | Nominal Input Voltage (Vac) |
Output Current (mA) | Power (W) | Voltage Range (Vdc) | Case Type | Dimming | Status | Availability |
|---|---|---|---|---|---|---|---|---|
| SLM090W-2.1-42-TC | 120 to 277 | 2100 | 88.2 | 30 - 42 | IP66 Rectangular Metal | For/Rev Phase & 0-10V, 1-100% | production | Check > |
| SLM100W-1.7-56-TA | 120 to 277 | 1700 | 95.2 | 40 - 56 | IP66 Rectangular Metal | For/Rev Phase & 0-10V, 1-100% | production | Check > |
Notes:
Notes:- T: Tri-mode dimming (1-100%), C: 1kV /2kV surge protection
- T: Tri-mode dimming (1-100%), A: 4kV/4kV surge protection
- X: No dimming, A: 4kV/4kV surge protection
- Z: 0-10V dimming only (1-100%), A: 4kV/4kV surge protection
- Forced air cooling or heatsink base plate (aluminum baseplate: 210mm x 200mm x 2mm) is required for total continuous power exceeding 120 W
- For additional options of output current and output voltage, contact your sales representative or contact us via email.